Get Real NCP-5.15 Quesions Pass Nutanix Certification Exams Easily
NCP-5.15 Dumps are Available for Instant Access
Introduction to Nutanix NCP 5.15
The 5.15 publication of the examination indicated the removal of 5.10. On September 15, 2020, the Nutanix NCP 5.10 exam will cease to be offered. On the other hand, you should only be confident that your scheduled date is before September 15, 2020, as you review and prepare for this edition of the test or that you are required to reset or move to a test at 5.15.
Different respectable organizations make massive efforts worldwide for the NCP-5.15 course. Nutanix is a well-known organization with tremendous technology investments. Nutanix has launched certifications Nutanix Certified Specialist that concentrates on a particular technology field. 5.15 Exam Certificates have an important role to play in the procurement of the new Nutanix Accredited Technical Technological Innovations Nutanix Accredited
Nutanix University is offering a course of the Nutanix certification which is for professionals it is an exam for which registrations are open. The new name of the exam is introduced because it covers different types of Nutanix technologies. It also highlights the different types of skills that will be used for earning after the certification of the course.
NEW QUESTION 118
What is Prism Central primarily used for?
- A. Multi-cluster network configuration
- B. Multi-cluster Single Sign On
- C. Container creation
- D. Data reduction configuration
Answer: A
NEW QUESTION 119
An administrator is working with Nutanix Support and needs to provide logs for troubleshooting an issue. The cluster is located in a secure environment. Data such as IP addresses and VM names cannot be shared.
Which method should be used to anonymize the log data sent to Nutanix Support?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: A
NEW QUESTION 120
Which configuration item is required to set-up email alerts?
- A. SMTP
- B. SNMP
- C. Pulse
- D. NTP
Answer: A
NEW QUESTION 121
Which three upgrades should an administrator be able to perform using Lifecycle Management? (Choose Three)
- A. BIOS
- B. Hypervisor
- C. BMC
- D. AOS
- E. HBA Firmware
Answer: C,D,E
Explanation:
Reference: https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000LMgICAW
NEW QUESTION 122
A Nutanix administrator needs to replace a self-signed SSL certificate with a CA generated certificate in Prism.
Which three files are required to install the CA generated certificate in Prism? (Choose three)
- A. Public Server Key (public_server.key)
- B. CA Certificate or Chain (ca_chain_certs.cer)
- C. Public Certificate (PublicCert.ker)
- D. Certificate Signing Request (server.csr)
- E. Private Server Key (private_server.key)
Answer: B,D,E
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=Prism-Central-Guide-Prism-v51:mul-security-ssl-certificate-pc-t.html
NEW QUESTION 123
What are two minimum prerequisites for live migration to succeed? (Choose two.)
- A. All VMs have an IP address in the same subnet
- B. All AHV hosts must be configured on the same VLAN
- C. All VMs are configured for the same VLAN
- D. All AHV hosts have IP addresses in the same subnet
Answer: A,B
NEW QUESTION 124
Which two items are required to manually upload an AOS update to a Nutanix Cluster? (Choose two)
- A. AFS Binary file
- B. AOS Binary
- C. YML file
- D. JSON file
- E. AOS zip file
Answer: B,D
NEW QUESTION 125
The Linux administration team has requested access rights to any current or future Linux VM in the environment What entity should be selected when assigning this new role?
- A. AHV Cluster
- B. Category
- C. Project
- D. Image
Answer: C
NEW QUESTION 126
CPU utilization climbs above 90% on several VMs. This causes performance degradation for a business-critical application.
How can alerts be configured to notify the administrator before VM CPU utilization hits 90%?
- A. On a CVM, use ncli to set the VM CPU Check threshold for the critical VMs to a value below 90%.
- B. On a CVM, configure a cron job to run the VM CPU Check more frequently and email the result.
- C. On the Alerts dashboard, ensure that the VM CPU usage alert is not set to auto-resolve.
- D. On the Health dashboard, locate the VM CPU Check and lower the alert threshold below 90%.
Answer: C
NEW QUESTION 127
An administrator needs to shut down an AHV cluster to relocate hardware. The administrator upgrades NCC and runs health checks.
Which steps should the administrator perform next?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements.
Answer:
Explanation:
Explanation
Reference:
https://next.nutanix.com/how-it-works-22/scheduled-power-outage-relocating-cluster-hardware-if-you-need-to-s
NEW QUESTION 128
An administrator needs to shut down and relocate a Nutanix cluster.
Which step should the administrator take after shutting down all guest VMs on the cluster?
- A. Put each host into maintenance mode
- B. Change the node and CVM IP addresses if necessary
- C. Execute the command: cluster restart_genesis on a CVM
- D. Execute the command: cluster stop on a CVM
Answer: D
NEW QUESTION 129
What policy would maximize throughput for the brO uplink of a host?
- A. Switch Dependent, Dynamic
- B. Route based on ip hash
- C. Active-Active
- D. Active-Backup with MAC pinning
Answer: C
NEW QUESTION 130
A system administrator needs to add more VMs to their Nutanix cluster.
Which two actions should the administrator perform to determine if the current cluster can accommodate the new VMs? (Choose two)
- A. Utilize Optimize Resources for VM efficiency
- B. Perform an inventory with Life Cycle Management
- C. Enable Deduplication and Ensure Coding
- D. Determine utilization with Cluster Runway
Answer: A,D
NEW QUESTION 131
In an AHV cluster, an administrator needs to enable an application to share a disk b group but needs to enable the VMs to see the volume group.
How should the administrator accomplish this task?
- A. Configure a virtual disk on each VM with identical attributes in the storage dashboard.
- B. Add a disk to one VM and enable read/write on it from the other VM.
- C. Create a shared folder for the VMs using Nutanix Files.
- D. Add the volume group to the VM using the update link from the VM dashboard.
Answer: D
NEW QUESTION 132
What are the resource requirements for a single small Prism Central instance?
- A. 2 vCPUs, 8 GB of memory, and 500 GiB o* storage
- B. 4 vCPUs. 16 GB of memory, and 400 GiB of storage
- C. 8 vCPUs. 32 GB of memory, and 500 GiB of storage
- D. 4 vCPUs, 16 GB of memory, and 500 GiB of storage
Answer: B
NEW QUESTION 133
Where can an administrator change a CVM password?
- A. CVM setting in Prism Central
- B. CVM setting in Prism Element
- C. KMS Server Terminal
- D. Prism CVM VM Console
Answer: D
NEW QUESTION 134
Which feature must be enabled in order to ensure that VMs are restarted on other hosts in the event of a host failure?
- A. Network Segmentation
- B. High Availability
- C. Live Migration
- D. VM Snapshots
Answer: B
NEW QUESTION 135
Which three configuration scenarios are valid for the deployment of Prism Central? (Choose three.)
- A. Prism Elements and Prism Central have proxy configured.
- B. Environments use the 192.168.5.0/24 CVM management network.
- C. Environments do not have Internet access.
- D. Prism Elements and Prism Central art in different subnets.
- E. Environments use Network Address Translation.
Answer: B,C,E
NEW QUESTION 136
Which best practice should be followed when creating a bond in a Nutanix cluster?
- A. Configure the bond to use LACP
- B. Place NICs of different speeds within the same bond
- C. Use the default bond configuration after installation
- D. Only utilize NICs of the same speed within the same bond
Answer: B
Explanation:
Reference:
https://next.nutanix.com/blog-40/maximum-performance-from-acropolis-hypervisor-and-openvswitch-6312
NEW QUESTION 137
Refer to the exhibit.
The Linux Admin role has been created to manage only Linux VMs in the environment. However, the Admin1 user does not have access to all Linux VMs.
What step should be taken to grant the proper access?
- A. Grant the admin1 user the viewer role (or the cluster.
- B. Add the proper category to each Linux VM.
- C. Add the role to the Linux images.
- D. Add the hosts to the entities KM for the role.
Answer: D
NEW QUESTION 138
Microsegmentation was recently enabled in a Nutanix environment. The administrator wants to leverage Prism Central to create a policy that will block all traffic regardless of direction, between two groups of VMs identified by their category.
Which policy should be used to meet this requirement?
- A. An Application Security Policy
- B. A Whitelist-Based Policy
- C. A Quarantine Policy
- D. An Isolation Environment Policy
Answer: D
NEW QUESTION 139
What is default behavior for VM High Availability for Nutanix AHV?
- A. VMs restart on other hosts as available resource allow
- B. Only VMs with High Availability explicitly enabled will restart
- C. No VMs restart because HA is not enabled by default
- D. All VMs restart because system reservation are already made
Answer: A
NEW QUESTION 140
what does an administrator do before shutdown nutanix node for maintenance in the cluster? (Choose two)
- A. migrate all guests vm from the host
- B. verify data resiliency status in the cluster
- C. reclaim license
- D. shutdown the cluster in that host
Answer: A,B
NEW QUESTION 141
......
For more info read reference:
Nutanix NCP 5.15 leaning site Nutanix NCP 5.15 resources
Get Instant Access REAL NCP-5.15 DUMP Pass Your Exam Easily: https://pass4sure.troytecdumps.com/NCP-5.15-troytec-exam-dumps.html