Free IBM S1000-007 Test Practice Test Questions Exam Dumps
Prepare Top IBM S1000-007 Exam Audio Study Guide Practice Questions Edition
NEW QUESTION 16
An administrator checks the IBM Fix Level Recommendation Tool (FLRT) for their system to see if they need to update IBM firmware or software.
The tool asks for their current system firmware level. How can the administrator confirm what it is?
- A. run lscfg -vl sys0
- B. run lsattr -1 firmware0
- C. run lsmcode -A
- D. run lsattr -El sys0 Igrep mcode
Answer: B
NEW QUESTION 17
Which logical volume Mirror Write Consistency policy should an AIX V7.2 administrator use to achieve the data consistency between mirrors?
- A. active
- B. off
- C. superstrict
- D. round robin
Answer: A
NEW QUESTION 18
One morning the application owner needed to urgently transfer some files using FTP from Development Dev_DB_Server to the production server - DB_Server, but is receiving the following error:
connect: Connection refused
Note: DB_Server-cannot be shutdown during business hours.
Checking the setup of DB_Serrver, the administrator finds the following entries in /etc/inetd.conf
The administrator also, finds the file /etc/ftpaccess . ctl doesn't exit.
Which two methods can be used to allow files to be transferred to DB Server using FTP?
- A. On DB_Server uncomment line starting with "#ftp" and run refresh -s inetd.
- B. On DB_Server uncomment line starting with "#f tp" in /etc/inetd.conf and reboot.
- C. On DBServer run command startsrc -s ftpd and create /etc/ftpaccess-ctl with line "allow: *".
- D. On DBServer run the command /usr/sbin/f tpd.
- E. On DB_Server run command startsrc -t ftp.
Answer: C
NEW QUESTION 19
A system administrator needs to open a console to an AIX virtual machine that is controlled by a Hardware Management Console (HMC). After connecting to the HMC using SSH, which command should the administrator run to open a console?
- A. mkrep
- B. mlcvterm
- C. mJcvdev
- D. oem_setup_env
Answer: B
NEW QUESTION 20
Which command lists filesets that are below AIX V7.2 technology level 4?
- A. lppchk: -L -F "fileset level" I grep -v "7200-04"
- B. lslpp -s -1 7200-04
- C. oslevel -r -1 7200-04
- D. instfix -i I grep -v 7200-04
Answer: D
NEW QUESTION 21
Which command will show when a file was last accessed?
- A. who -f file
- B. Is -1 file
- C. istat file
- D. fsdb file
Answer: C
Explanation:
The istat command displays information about the inode of a file, including the last access time. This command is available on IBM AIX v7 systems and is documented in the IBM AIX v7 Administrator Specialty Study Guide. The syntax for the command is "istat file", where 'file' is the path to the file you would like to check. For more information, please see the IBM documentation at https://www.ibm.com/support/knowledgecenter/ssw_aix_72/com.ibm.aix.cmds2/istat.htm.
NEW QUESTION 22
When attempting to recover a corrupted file system an administrator runs the command fsck against the unmounted file system and receives the following error:
After confirming that the file system is not mounted, what should the administrator do next?
- A. Run logform /dev/u1v11.
- B. Run fsck: with the -F (force) flag.
- C. Convert the log to INLINE.
- D. Run logrcvr /dev/ulv14 .
Answer: B
Explanation:
When attempting to recover a corrupted file system, the administrator should first confirm that the file system is not mounted. If the file system is not mounted, then the administrator should run the fsck command with the -F (force) flag. This will force the fsck command to check the file system for errors and attempt to fix them. Reference: IBM AIX v7 Administrator Specialty Study Guide (page 8-23).
NEW QUESTION 23
An administrator is tasked with installing an open source package. They are told to use the IBM AIX Toolbox for Linux Applications because the organization wants to be able to open tickets with IBM support.
What should the administrator tell the requester?
- A. IBM offers standard support for open source software that is licensed with the operating system.
- B. IBM offers this open source software as-is.
- C. IBM offers extended support for open source software that is licensed with the hardware.
- D. IBM offers extended support for open source software and they need to verify entitlement.
Answer: D
Explanation:
"IBM provides extended support for open source software installed on AIX systems. The customer must verify entitlement for such packages and must contact IBM Support to open a ticket." Therefore, the administrator should tell the requester that IBM offers extended support for open source software, but they need to verify entitlement before they can open a ticket with IBM Support.
NEW QUESTION 24
An administrator finds that their development server has crashed and an error code 554 is displayed. They know that this error is typically associated with a problem executing varyon rootvg and they should boot from AIX Media to be able to perform maintenance tasks. When the administrator checks the crontab of the NIM server, they find that a mksysb image is created each night.
Can the administrator use this mlcsysb to boot the server and perform the required maintenance tasks?
- A. No, because mksysb is not bootable.
- B. Yes, but they may need to create a spot first.
- C. Yes, but they may need to create a machine resource first.
- D. No, because they need to use the original AIX installation media for that server.
Answer: C
Explanation:
A mksysb image is a snapshot of the AIX operating system and its configuration, so it can be used to boot the server and perform the required maintenance tasks. However, in order to use the mksysb image, the administrator may need to create a machine resource in the NIM environment first. According to the IBM AIX v7 Administrator Specialty Study Guide (page 13-6), the mksysb image should be used in combination with a previously created machine resource, which defines the parameters for the installation.
NEW QUESTION 25
An application administrator needs an account on the AIX server, but does not know it which group it should belong. What is the default group for AIX users, if one was not specified during creation of the account?
- A. no group
- B. staff
- C. users
- D. the group name will be the same as the user name
Answer: C
Explanation:
This is the default primary group for all newly created AIX user accounts. From the IBM AIX v7 Administrator Specialty Study Guide: "By default, all new user accounts are assigned to the 'users' primary group."
NEW QUESTION 26
Which command will show when a file was last accessed?
- A. who -f file
- B. Is -1 file
- C. istat file
- D. fsdb file
Answer: C
NEW QUESTION 27
What is the effect of running the mount -a command?
- A. All JFS/JFS2 file systems are mounted.
- B. All file systems defined to the system are mounted
- C. Ail file systems set to mount=true are mounted.
- D. All automatic file systems are mounted.
Answer: C
NEW QUESTION 28
Which statement is true regarding the snap command?
- A. It collects performance related data.
- B. All options are enabled by default.
- C. By default, it will check there is enough space where the data is to be stored.
- D. The data must be stored in /tmp.
Answer: A
NEW QUESTION 29
An AIX system is defined as a NIM client with -a connect=shell. The client system is up and running. The client can ping the NIM master, and the master can ping the client. The administrator of the NIM master system attempts to use NIM to install software updates on the NIM client, but receives the error message Permission denied.
What can the administrator of the AIX NIM client do to help resolve the problem?
- A. Flush the arp cache and then reboot the client system to ensure the network route table is correct.
- B. Check the firewall configuration and open port 1066 if required.
- C. Edit the /etc/services file to check the port number used for the nimreg service, then refresh inetd.
- D. Check that the root user's .rhosts file has an entry for the NIM master, and that the file permissions are
600.
Answer: C
NEW QUESTION 30
An AIX administrator installed the fileset named useful_fileset. How can they determine which files are included in the fileset?
- A. lppchk -f useful fileset
- B. file -f useful__fileset
- C. lslpp -f useful_fileset
- D. rpm -qf useful_fileset
Answer: C
Explanation:
The "lslpp" command can be used to display information about filesets installed on an AIX system. To determine which files are included in the "useful_fileset" fileset, the administrator can run the following command:
lslpp -f useful_fileset
This command will display detailed information about the "useful_fileset" fileset, including a list of the files that are included in the fileset. This information can be useful for verifying the installation of the fileset and for troubleshooting problems that may be related to the fileset.
NEW QUESTION 31
While executing the following extendvg command, the system administrator receives the following error:
The administrator used the chvg -t command to fix the error.
What is the implication of running this command?
- A. It reduces the maximum number of files allowed within that volume group.
- B. It reduces the maximum number of logical volumes allowed within that volume group.
- C. It reduces the maximum number of physical volumes allowed within that volume group.
- D. It reduces the maximum file size allowed within that volume group.
Answer: D
NEW QUESTION 32
An IT security department would like to limit root user access to only members of the group called system.
Which command will accomplish this?
- A. chadmin group=system root
- B. chadmin user=root system
- C. chgroup admin=root system
- D. cruiser sugroups=system root
Answer: C
NEW QUESTION 33
When the system boots it stops and displays reference code 551. This reference code means the rootvg will not varyon. What is the best way for the administrator to proceed?
- A. Reinstall AIX or restore from a mksysb.
- B. Perform a debug boot of AIX and diagnose/fix the problem.
- C. Restart the system.
- D. Perform a maintenance mode boot of AIX and diagnose/fix the problem.
Answer: D
Explanation:
This code indicates that the rootvg will not varyon, and performing a maintenance boot allows the administrator to diagnose the issue and fix it. From the IBM AIX v7 Administrator Specialty Study Guide: "When the system is halted with a reference code 551, the rootvg will not varyon and the system will not boot. The administrator must perform a maintenance mode boot to diagnose the problem."
NEW QUESTION 34
While trying to extend a file system named /work an administrator receives the following error. 0516-787 extendlv: Maximum allocation for logical volume fslv00 is 256.
What must be done to allow the file system to be extended?
- A. Increase the volume group's maximum limit of logical partitions per logical volume.
- B. Increase the setting for maximum number of logical partitions for that logical volume.
- C. Change the logical volume type to jfs2 as JFS logical volumes cannot extend past 256.
- D. Change the file system's maximum capacity.
Answer: B
NEW QUESTION 35
A system administrator needs to open a console to an AIX virtual machine that is controlled by a Hardware Management Console (HMC). After connecting to the HMC using SSH, which command should the administrator run to open a console?
- A. mkrep
- B. mlcvterm
- C. mJcvdev
- D. oem_setup_env
Answer: B
Explanation:
The mlcvterm command is used to open a console to an AIX virtual machine that is controlled by a Hardware Management Console (HMC). According to the IBM AIX v7 Administrator Specialty Study Guide, the mlcvterm command allows you to open a terminal window to the console of a logical partition (LPAR) running AIX.
NEW QUESTION 36
While a system administrator is checking the TCP/IP connectivity between two systems with the traceroute command, the administrator found Fragmentation required messages in the traceroute output.
What is the likely reason for these messages?
- A. The TCP buffers in the router gateway are exhausted. The source and target system are having TCP/IP communication problems.
- B. The TCP buffers between the source and the target systems are exhausted. The source and target systems are using virtual ethernet adapters.
- C. Same MTU sizes between the source and target systems. The source and target systems are using Jumbo Frames. The LPARs are using the same Virtual Switch (vSwitch) Network.
- D. Different MTU sizes between the source and target systems. The source system is using Jumbo Frames and the target is using the default MTU size.
Answer: D
Explanation:
The source system is using Jumbo Frames and the target is using the default MTU size. Fragmentation required messages can appear in traceroute output when the Maximum Transmission Unit (MTU) size of the source and target systems are different. In this case, the source system is using a larger MTU size (Jumbo Frames) than the target system (default MTU size). As a result, the router gateway must fragment the data packets in order for them to reach their destination. This is why the fragmentation required messages appear in the traceroute output. Reference: IBM AIX v7 Administrator Specialty Study Guide.
NEW QUESTION 37
......
IBM S1000-007 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
Go to S1000-007 Questions - Try S1000-007 dumps pdf: https://pass4sure.troytecdumps.com/S1000-007-troytec-exam-dumps.html